"Breville® Dual Boiler BES900XL Espresso Machine" Is Not Available for Sale Online.
We have provided the content below as informational. Please view additional items Customers also viewed.
- Shots are extracted at the right temperature, while milk is simultaneously steamed with the 3-hole tipped, 360 degree swivel steam wand
- The Heat Exchanger and additional element in the group head ensure the entire system maintains a consistent temperature
- Features an Over Pressure Valve, which limits the 15 Bar Italian pump throughout the extraction.
- It offers a true low pressure pre-infusion for even extraction
- Includes adjustable brew temperature, a temperature display in either F or C, a preset/manual-override/programmable shot volume and programmable pre-infusion duration and pre-infusion power
- Optional Auto Start setting preheats the machine at a programmed time
- Measures 16"L x 14.2"W x 16"H
- Water tank is 84-ounces
- One-year warranty
- Model # BES900XL
SKU # 18858622
When the Breville designers set about making this espresso machine they didn’t take their cues from the domestic market. What they did was, they went out and they took the best from the commercial world and thought about how can we take these features and put them in this domestic product to go on somebody’s bench in their kitchen.
The way a regular espresso machine would control temperature is they’d use a Thermoblock. A Thermoblock is simply a heated block of aluminum with a tortured path carved into the center of it. The water enters here and exits here into the ground coffee. The Thermoblock system is designed around water flow. If water flows too quickly the water will be cold. If the water flows too slowly than the water will be too hot. This translates into flavors in the cup.
One of the problems using a Thermoblock system is you have to wait a long time for the Thermoblock to heat to make steam and a long time for it to cool down or purge a lot of water through it to make espresso again. The way we cover that off is we’ve got two independent boilers so we can control espresso temperature and steam pressure independently. No heat up time, no cool down time. Available instantly. This allows us to deliver at exactly the temperature that the user has programmed it to plus or minus a degree.
Pre-infusion is where we deliver water at lower pressures and slowly ramp up to maximum pressure of nine bar. This means that the ground coffee is more evenly soaked prior to full pressure. If you do use a machine with a 15 bar pump and you do have that overpressure at the initial stages of extraction that will promote channeling in the cake. What’s channeling? That’s where water that’s delivered to the ground coffee finds a least path of resistance either down the side of the cake adjacent to the wall of the coffee basket or sometimes through the center of the coffee cake. This will produce really bitter and over extracted flavors in cup. This means that the ground coffee is more evenly soaked prior to full pressure so you get the best flavor in the cup.
So what else has the machine got? The machine has a preheated group head. What this does is this aids in the thermal stability, one of the key components for producing great espresso. Also it has a fully cast stainless steel filter basket. We provide an integrated tamper, steam on demand. We also have preprogrammed and the ability to use a program 1 cup, 2 cup and a manual override button. All these are programmable through the integrated LCD.
The integrated LCD can give you a lot of information. Two of the key things that it does give you, the temperature that you’ve selected to extract your espresso and it also gives you a shot clock. What’s a shot clock? The time that it’s taken for the espresso to be extracted. This is one of the key indicators to whether you’ve done a consistent or a good job of the pour.
So let’s make a coffee. What we’re using here is we’re using Brevile’s BTG800 Smart Grinder. Use the integrated tamp to tamp down squarely and firmly. Insert the portafilter into the group head and extract. What we’re expecting to see here after about 10 seconds is a nice honey flow of coffee - dark, rich and you can see that we’ve achieved that there. So we have nice straight pours, not striping, very nice-looking espresso.
We’re just going to texture some milk. So you can see it is easy for us to texture milk and extract espresso both at the same time. With the dedicated steam boiler we can generally texture milk around about twice as fast as you would from the Thermoblock system. When it reaches 60 to 65 degrees turn off the steam valve, wipe the steam wand, purge and then we’re ready to pour our coffees. Commercial precision in a domestic footprint.