Catalog page: Convertible Patio Covers

It's a canopy and screen enclosed extended event tent in one convenient kit. Quickly convert your 10' x 20' canopy to a fully enclosed screen house that goes up or down in minutes. It boasts a heavy-duty 1 3/8" diameter all-steel 8-leg frame, and a Dupont™ thermoset baked-on powder-coat finish that prevents chipping, peeling, rust and corrosion. It is quick and easy to set-up with built-in slip-together swedged tubing and a fitted, fully valanced polyethylene cover. The cover is 100% waterproof with advanced engineered, triple-layer and rip stop fabric features, plus it is UV treated inside and out with added fade blockers. A 50+UPF rating blocks more than 98% of UV rays. The Twist Tite™ tensioning squares up the frames and tightens down the covers. Includes: 10' x 20' canopy with 1 3/8" steel frame, one-piece polyethylene fitted cover, screen kit, temporary spike anchors, SL bungee cords - white, 8 foot plates - white, and easy step-by-step instructions.

The extra kits included with this 10' x 20' canopy let you quickly convert your canopy to a fully enclosed shelter or an expanded 24' x 20' event tent. Bungee cord fasteners and expansion poles allow easy conversion in just minutes. The canopy features heavy-duty 1 3/8" diameter steel frame with 8 legs for stability and a Dupont™ thermoset baked-on powder-coat finish to prevent chipping, peeling, rust and corrosion. Set up is quick and easy with slip-together swedged tubing. Wide foot plates ensure easy access to secure anchor points. The fitted, fully valanced polyethylene cover is 100% waterproof with rip stop fabric features, plus it is UV treated with added fade blockers. A 50+UPF rating blocks more than 98% of UV rays. Twist Tite™ tensioning squares up frames and tightens down covers. Includes: 10' x 20' steel frame, polyethylene cover, 4-wall enclosure kit, extension kit, SL bungee cords, 8 foot plates, temporary spike anchors, easy step-by-step instructions.

Expand or add a side wall to your ShelterLogic® canopy using the Canopy Extension/Side wall Kit. Quickly and easily convert your 10' x 20' MAX AP Canopy or 18' x 20' Super Max Canopy to a fully covered event tent, single wall, or double side wall windbreak. The walls are made of triple-layer, rip-stop, woven polyethylene fabric and blocks more than 98% of UV rays with a 50+UPF rating. The fabric is also UV-treated inside and out and features heat-sealed seams for a strong bond and water resistance. By simply removing the poles, the panels act as wind or sun barriers. The easy-to-install pre-fit wall panels go up fast with bungee fasteners. This accessory will fit both 1 3/8" and 2" frame sizes. Includes all-steel panel poles, rope tie-downs and temporary anchors. Model #25730